|
Activated carbon fiber "KF" is a carbonated
fiber, developed by Toyobo produced by using cellulosic
fibers as the base material. From its unique properties,
it is deemed to be the tertiary activated carbon after
powdered carbon and granulated activated carbon.
|
 |
|
KF Fiber is a novel activated carbon fiber
with the following properties;
While the surface area is extremely large ranging from 1,000
to 1,600m2/g, it is characterized by a micro pore
structure with an extremely small diameter of 0.5-10nm.
It effectively adsorbs and eradicates a broad stratum of
various substances. The capacity for adsorption is greater
than conventional granular activated carbon.
The speed of adsorption is high, ranging from 10 to 100 times
that of conventional granular activated carbon.
The drop in adsorptive properties is slight even when adsorption-desorption
is repeated. Desorption time is short compared to conventional
granular activated carbon. |
|
|
| Four different forms are commercially available,
KF-felting, paper sheets, corrugated paper and, honeycomb
structure. You can choose the most suitable type according
to the requirement.
|
|
|
"KF" makes full use of its unique
properties derived from the fact that it is basically a
fiber and can
be used for the variety of application areas shown as follows.
- Solvent recovery apparatus(KF Apparatus)
- KPR solvent gas treatment system(KPR System)
- Ozone alimination filters
- Air purifying filter units
- Air purifying filters for passenger cars
- Gasoline vaporization protector for cars
- Abatement of insole odors
|
|
|
